cart
cart
USD
  • USD
  • AUD
  • CAD
  • EUR
  • GBP
  • SEK
cart

Comments on Falcon WHEELSET R45 Road/CX

U shape 45mm depth Hand-built 700C carbon 25mm wide clincher road bicycle wheels for tubeless compatible

A

Arnie 2022/10/17

I am interested in your carbon 45 rim brake wheel set. My bike is a 2016 Wilier GTR Team with Campagnolo Athena side pull brakes. Though the manufacturer says I can run up to 28mm tires, there is no mention of maximum rim width the bike can accept. Are there any measurements I could take that on the bike that could help me determine if I could fit a much wider rim than my current Campagnolo Zondas. Thank you


LightBicycle 2022/10/18

Hi Arnie, If the calipers are compatible with 28c tires, your bike is okay for 28mm wide wheelset. You can double check with our bike supplier. Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

R

Rad 2022/05/16

Hello, regarding your R45 Carbon Road Wheelset, I noticed all customer photos show the rims with EXTERNAL spoke nipples. I am thinking purchasing the R45 rims only and wondering is these rims are compatible/reinforced to accommodate INTERNAL spoke nipples. Thanks for any comments...


LightBicycle 2022/05/17

Hi Rad, Yes, the R45 700C 25mm wide 45mm deep 700C rim brake is compatible to internal spoke nipples. The R45 with High TG surface cost USD154/each, 3-year warranty. The R45 with Grooved Graphene surface cost USD184/each, 3-year warranty. Which surface would you prefer? Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

T

Tom 2022/02/13

Hello, I am really interested in the Falcon R45s, but I’m not sure how to tell if they will fit my bicycle. My 2014 Scott CR1 10 has narrow rear chainstays. I currently run older Boyd Altamont allow clincher rims with a 21mm inner width, which makes the widest tire I can run a 23c. (Which in practice inflates out to around a 25). What critical dims can I measure with a caliper to make sure the R45s will fit before ordering? I plan to run them tubeless with 23c tires. Thanks, Tom


LightBicycle 2022/02/14

Hi Tom, 1. The 2014 Scott CR1 10 normally comes with Shimano BR-R561 calipers, can you check if these are the calipers you have? If so, the official recommendation rim range is 19-26mm according to SHIMANO. The R45 700C should be ok to fit the calipers. 2. Please measure the narrowest spacing between the chainstays and seat stays to make sure they are wide enough for the rims 700C. The widest area of the R45 is 27.3mm. Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

S

Shiv 2021/06/19

Hi, I am looking at a LightBicycle wheelset (25mm) - are you shipping to India these days? if so what is the shipping cost. Shiv


LightBicycle 2021/06/19

Hi Shiv, Do you like 25mm wide/25mm deep clincher wheelset 700C? or 25mm wide/45mm deep 700C wheelset? You can list the wheelset specs here, then we can quote accordingly for you. Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

C

Clod 2020/12/21

Would it be possible to go with differentiated rims - 35mm front rim and 45mm rear rim? Is the cost going to be the same ? Thanks, Clod


LightBicycle 2020/12/22

Hi Clod, Yes, we can build a mixed size wheelset 700C for you. Could you be more specific about the specs that you are interested in? I will send more details to you for ref. Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

J

Jordan 2020/11/26

Hi there, I want to purchase a set of wheels for Black Friday. I built a set of wheels through the website but noticed that satin was not a finish that was available. I also wanted to do custom graphics -- just single decal where the valve is. Rim Model: R45 Size: 700C Series: Falcon Use: road/CX Type: Clincher non-disc Inner/outter width: 17.9mm/25mm depth: 45mm Hubs: carbon-ti x-hub Driver body: shimano road 11s Spoke: Sapim CX Ray Nipples: Sapim aluminum black Brake system: non-disc grooved graphene surface finish: Satin weave: UD Center Channel Hole: Without holes Decal: do you have a gold foil option? otherwise just stealth grey Brake Pads: add brake pads Thanks!


LightBicycle 2020/11/26

Hi Jordan, We have sent an email to you about this R45 rim brake order. Please check. Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

M

Mike 2020/10/01

Hi! Is is possible to have just the valve stem logo decal and not the larger decals on the wheels? I am looking at purchasing either the AR 46 or R 45 wheelset. Also, is it possible to get either of these rim brake wheelsets with DT 240 hubs? Thank you and enjoy your day! :)


LightBicycle 2020/10/02

Hi Mike, Thanks for your inquiry!Yes, it is okay to have only valve logo on rims/wheels. When you place the order, you can leave a message on the order that "only valve logo please". Then we can see it and will double check with you after receiving your order, to make sure everything is correct. Also, we can take wheelset pictures for your check before shipping. Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

B

BT 2020/05/04

Hi, I was wondering why none of the wheels have the "North American Warehouse" option, can only see the "Global Options"


LightBicycle 2020/05/04

Hi Sir, We only have disc road rims stock in the America warehouse at the moment. Is there any reason that you prefer the h America warehouse? You can get all configurations from the Global warehouse as well. Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

D

Darrell 2020/02/07

Hello Nacy, I have a set of your road wheels bought in 2018 and I Love them. I’am thinking of another set of your wheels for my other bike. Do you send wheelset to Mazatlan, Mexico. If so what is the cost? Thank you Darrell Moquist


LightBicycle 2020/02/08

Hi Darrell, First of all, we are so happy to hear that our wheels satisfied you. We do offer some discount for our returning customers. Please let us know which 700C wheels you like. We can quote for you. Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

S

Seth 2019/06/13

Hi, I'm looking for a new wheelset and I have a few questions about your return/warranty policy: - If I buy your product, and I am not satisfied with it, can I send the wheelset back and get a guaranteed refund? - If I crash my wheelset that I purchase from you, can I return it and get a discount on a replacement set of wheels? Thanks


LightBicycle 2019/06/17

Hi Seth, 1. Yes, just send back the product in good condition for a refund if the wheelset is new(without riding). 2. A crash replacement with very good discount works well there in common practice. Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

J

Jonathan 2019/04/21

I usually run 25mm tyres. Will this pair of wheels be suitable or should I get the 28mm outer width wheels for better aero dynamics?


LightBicycle 2019/04/22

Hi Jonathan, I am Nancy from Lightbicycle. We talked online on weekends. I know your ride 25mm tires. From our research and test, the rim width has to be slightly wider than tire width. Then it has better aerodynamics. So, we recommend you to go for RR46C02(28mm wide/46mm deep) rims/wheels. Do you like 700C complete road wheelset or just rims only? We can quote accordingly for you. Thanks, Lightbicyle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

P

Peter 2019/03/26

Am around 76kg, on carbon rim brake frame, basically riding relatively on flat road for speed. Sometimes, i do like to go for a climb but the gradient we have here is only 11% max and is just around 200m only. Am not sure does it justify for my below requirement or you have better suggestion. Which wheelset do you recommend? WRU45C02 or WR46C02 Can i go for spokes of 16 front, 20 rear? Possible to request without inner spoke holes?


LightBicycle 2019/03/26

Hi Peter, 1. Yes, we can make UST road wheels without spoke access holes on rim bed for you like the attachment. 2. Is it windy at where you ride? What about crosswinds? The WR45C02 provide better aerodynamics in no wind and lighter, the WR46C02 on the other hand with rounded "second" leading edge allows for more attached airflow, which reduces drags and increases balancing side force. You are a light rider and riding not aggressive, both wheelsets work well for you. 3. Do you have any specific hub(Front 16H, rear 20H) that you like to build the wheelset with? Power way R13 hub red okay for you? Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

J

Jason 2019/03/20

Keen on these wheels, however I would like to confirm details for a disc brake build. https://www.lightbicycle.com/U-shape-45mm-depth-Hand-built-700C-carbon-25mm-wide-clincher-road-bicycle-wheels-for-tubeless-compatible.html Wanting straight pull hubs as well, aero spokes, clincher. 12mm through axle, 100mm front, 142mm I see also you say 0 offset (symetrical), I assume this is for a rim build, and a disc build will be Asymetrical, yes? Cost and delivery to Australia?


LightBicycle 2019/03/20

Hi Jason, Thanks for your inquiry! For RRU45C02 rims, the rim profile is designed as symmetrical. We do not have asymmetrical for road rims yet. For road rims, asymmetrical rim profile will affect the aerodynamics. So, normally most brands do not manufacture road rear rim with asymmetrial. Please find our quotation as below. It is USD681.40/pair. - Rims: RRU45C02, UD matte, 24H, disc - Hubs: black DT Swiss 350 road disc, front 12*100mm/rear 12*142mm, straight pull, centerlock, shimano road 11S, 18T - Spokes: black sapim cx-ray bladed straight pull - Nipples: black aluminum If it is with DT Swiss 240S road disc hubs, it is USD859.40/pair. The delivery cost is USD58 for one wheelset to Australia by EMS delivery. Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

B

Batu 2019/03/02

Hi, Do you ship to Turkey? If so, are there any payment methods other than PayPal? Because PayPal doesn’t operate where i’m from.


LightBicycle 2019/03/04

Hi Batu, Yes, we can ship to Turkey. The shipping cost would be USD116.5 for one bicycle wheelset by EMS delivery. For payment method, we normlly accept paypal, bank transfer or western union. Which do you prefer? Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

A

agee 2019/02/10

hi! from S.korea! Could you build using Tune's Mig/Mag hubs? and could you hlep me calculate estimate price?? Front : 18Holes, Rear : 24 Holes Front : CX-Ray Rear : NDS : CX-Ray DS : CX-Sprint With Sapims brass nipples Hubs, Spokes and nipples are silver color! Thanks!


LightBicycle 2019/02/12

Hi Agee, Do you like Tune MIG70/MAG170 or MIG45/MAG150? Then we can get road wheelset price accordingly for your reference. Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Get in touch

Feel free to leave a comment if you have any questions or suggestions on our products or other issues.

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

We use cookies for a better experience. Learn more.
Customize
Accept

Your Cookie Preferences

We use cookies to improve your experience on this website. You may choose which types of cookies to allow and change your preferences at any time. Disabling cookies may impact your experience on this website. You can learn more by viewing our Cookie Policy.

  • Cookies required to enable basic website functionality.

  • Cookies used to understand how the website is being used.

  • Cookies that are used to enhance the functionality of the website.

  • Cookies used to deliver advertising that is more relevant to your interests.

Aceept All Cookies
Save Preferences
Reject All Cookies
Save Preferences
Reject All Cookies
Accept All Cookies