RM29C06 Carbon MTB Wheelset

Comments on Recon WHEELSET RM29C06 Cross Country

beadless carbon 29er XC light weight mtb tubeless wheelset hand-built 27mm wide

<< Return to Shop

Dan 2020/10/22

How much is shipping to the UK?

LightBicycle 2020/10/22

Hi Dan, Do you like rims only or 29er XC complete wheelset? We can quote accordingly for you. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Barry 2020/08/19

I need to replace my older gen 32 spoke Rovel carbon rear rim.The wheel is used on a gravel bike that can have up to a 40c tire.Rovel/ DT Swiss rear hub.I weigh 175lbs and ride aggressively .What carbon rim do you suggest?

LightBicycle 2020/08/20

Hi Barry, What tire pressure do you ride normally? May i know your weight please? Then we can check which gravel wheels are better for you. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

JoeHat 2020/08/16

Hi looking for some 29er carbon lightweight wheelst for my wifes Canyon Exceed sl 6.0. She uses it for street riding mostly, with 1.9 road tires mounted now. She weighs in at 170 lbs. 6 bolt discs and boost spacing . Interested in hi quality 36 hubs also , color blue is possible, thx

LightBicycle 2020/08/17

Hi Joehat, 1. Your wife is a light rider. Ours recommend rider range for RM29C06 (27mm wide) is under 90kg. So she will be ok with 28 spokes or 32 spokes. No need for 36 spokes since she mostly rides on the street. 2. Do you have budget of this XC wheelset? Then we can check which hubs and spokes are better. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Relu 2020/08/04

Hi , I need a set of wheels build with RM29C06 Cross Country flyweight. I would like a more budget friendly hub like Novatec straight pull centerlock disc (Novatec D411SB-CL D412SB-CL). Spokes should be sapim cx ray 24 spokes per wheel. Can you let me know if you can do this setup. Also, I have a werid setup bike with 15x100 thru axle front and 135 QR back. I wonder if the Novatec comes with adapters. Thank you

LightBicycle 2020/08/04

Hi Relu, Yes, we can build a 29er XC wheelset with Novatec hubs for you. Note that Novatec D411SB/D412SB are road hubs. And this model don't have the axle size you want. Will D791SB/792SB work for you? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Luke 2019/09/29

Hello, I would like to order a set of wheels where the front can be switched between 100x15 and 100QR and the rear wheel can be switched between 135QR and 142x12. Disc brakes of course. I heard this is possible with DT Swiss 350 hubs and some endcap adapters. Do you sell these adapters, and if so how do I add them to the order?

LightBicycle 2019/09/29

Hi Luke, According to DT end cap solution, 350 Classic MTB db Center Lock (15 mm) and 350 Classic MTB db IS (15mm) can convert into 5mm Quick Release 5/100mm MTB. The 350 classic MTB db Center lock or IS can convert into 5mm Quick Release 5/135mm for ratchet Shimano Rotor or Sram XD MTB rotor. We just sent you the 29er XC wheelset price and end adapters quotation to your email address. Please check. Thanks, Lightbicycle

Mitch 2020/05/04

Hello, I am looking at doing the same thing. Could you please send me the information on the hub caps? Thank you.

LightBicycle 2020/05/05

Hi Mitch, Do you also want hub caps to convert between135mm*QR to 12/142mm for this 29er wheelset? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Tony 2019/05/14

Riding a 2014 Specialized Epic Comp Carbon 29 XC riding / racing rider weight 150 pounds Interested in 29C06, need advise on setup, freehub, spoke head, spoke count and ratchet Looking at Swiss 240 hubs Thanks for any advise Tony

LightBicycle 2019/05/15

Hi Tony, Thanks for your inquiry! For your riding, we recommend below 29er XC wheelset specs for you. It is USD868/pair. - Rims: RM29C06 27mm wide, UD matte 28H standard version - Hubs: black DT Swiss 240S, front 15*100mm/rear 12*142mm, straight pull, 6-bolt disc, shimano MTB 10/11S, 18T ratchet - Spokes: black sapim cx-ray bladed straight pull - Nipples: black aluminum If it is with DT Swiss 350 hubs, it is USD716/pair. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Tomasz 2019/01/13

Mihao What's the weight of complete carbon wheels in the following specification: tubless ready / Novatec D411/D412 straight pull hubs for 142*12/100*15mm thru axle or similar / Shimano 11s / 28/28H or alternative. Which your product would you recommend? Looking for 1200g.. Xièxiè Tomasz

LightBicycle 2019/01/15

Hi Tomasz, 1. The weight for the configuration you asked is 1209g+/-25. The rims are flyweight version RM29C06 on the front and standard version on the back. Using Sapim CX-Ray spokes. Note that our rims are all handbuilt, so there is a tolerance of the final weight. Also, you might like to know the wheelset price is USD647/pair with the configuration mentioned. 2. Can you be more specific about your riding? I can't be sure the wheelset above fits your profile or not. Can you kindly provide below details so I can make some recommendations accordingly? --Your weight --What kind of riding you plan to do with the wheelset? XC? or gravel and road? --Tire width you use? --Are you consider yourself an aggressive rider? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Esteban 2018/03/07

When you refer to maximum weight for the standard and flyweight versions, are you considering the combined weight of rider and bike or only rider?

LightBicycle 2018/03/08

Hi Esteban, The max weight is referred to the rider. Note that RM29C06 is intended design for XC racing . May i know your weight and riding style please? Then we can check whether it is strong enough for your riding or not. Thanks, Lightbicycle

Fritz 2018/10/13

Same question I am 175 Ride trails that are sometimes rough Thinking flyweight with 32 hole rims What do you think?

LightBicycle 2018/10/15

Hi Fritz, For the max weight limit, it's 100kg on standard rim and 90kg on flyweight rim. So, the flyweight wheels is OK for your weight and riding. The 32H wheels will be slightly stronger than 28H. The 32H wheels is also 40g roughly added compared to 28H wheels. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Patrick 2018/04/10

Any chance you will be making a flyweight XC rim that has a inner diameter of 25 with a outer of 30 or so? This seems to be where DT Swiss and Enve are going with there light race wheels. if you made this I would order it tomorrow! Patrick

LightBicycle 2018/04/10

Hi Patrick, We have RM29C19 with 24mm inner/30mm outer width, will this work for you? https://www.lightbicycle.com/U-shape-29er-rim-30mm-wide-hookless-MTB-bike-carbon-rims-tubeless-compatible.html Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

SB 2017/11/25

I have a 2017 cannondale Scalpel with the newer Lefty 2.0. just wondering which front hub you would recommend to build on the Flyweight rims? thanks

LightBicycle 2017/11/25

Hi sir, Do you want front wheel only or do you like complete wheelset? Then we can quote accordingly for you. Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

bobo 2017/07/14

will the XX1 freehub accept the XO 12 speed cassette ?

LightBicycle 2017/07/14

Hi Bobo, All Sram 9 or 10 speed cassettes are with Shimano freehub style. Only the Sram 11/12 speed cassettes use the Sram XD freehub driver. Sram has X01, XX1, X1 which all use the Sram XD freehub body. Do you mean Sram 12 speed cassettes? If yes, Sramxx1 is compatible with Sram 12 speed cassettes. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

brian 2017/06/09

Ship date & origin location for a set of 29" MTB wheels [29C06]?

LightBicycle 2017/06/09

Hello Brian, Thanks for your inquiry. We have 28H and 32H rims in stock. It will be fast to build wheels. What hubs do you like for wheelset? Then we can check on the lead time accordingly. All our wheelsets are built in China currently. We also have US building line currently. Which country are you from? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Thomas 2017/06/06

Hello there - are you able to supply/build these wheels with the Hope single speed rear hub at all ? Thanks, Thomas

LightBicycle 2017/06/07

Hello Thomas, Thanks for your continued support. We can build the rear wheel with Hope pro4 single speed hub. Are the hubs with front 15*100mm/ rear 10*135mm single speed? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

William 2017/03/29

Hi, I have a 2014 Cannondale team scalpel carbon with Enve XC 29er carbon rims. I shattered the rear rim and need a replacement rim. I am looking for the hoop only. I am looking at your 29c06 rim. Is this the closest rim you have to my current Enve? I only need the hoop to repair my wheel. Do you sell just the hoop and what is the cost?

LightBicycle 2017/03/30

Hello William, Thanks for your inquiry. Our RM29C06 rim is designed for XC riding and will work with your bike. It is okay to buy the rim only. Normally, you need to get some new spokes also, because the rim ERD is different, so the spoke length will be different. RM29C07 (27mm width): 360 /-15g, $165/pcs Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Ed 2017/02/16

I don't see an option to choose different hubs other than the Hopes. Is the price the same for DT350 and Hope hubs? 28 hole, 6 bolt IS, J bend, 15x100 FW, 135 QR RW, Shimano compatable 10 speed freehub. Thanks Ed

LightBicycle 2017/02/17

Hello Ed, Thanks for your inquiry. Hope and DT Swiss hubs are available. But there are not all axle or QR options on our website. Sorry for the inconvenience. Please find our quotations as below. All pricing in USD. -WM29C06 (with Hope pro4 hubs, Sapim cx-ray spokes): $867/pair -WM29C06 (with DT 350 hubs, Sapim cx-ray spokes): $767/pair Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

<< Return to Shop

1 2 3 4 5

Get in touch

Feel free to leave a comment if you have any questions or suggestions on our products or other issues.

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

We use cookies for a better experience. Learn more.

Customize

Your Cookie Preferences

We use cookies to improve your experience on this website. You may choose which types of cookies to allow and change your preferences at any time. Disabling cookies may impact your experience on this website. You can learn more by viewing our Cookie Policy.

Essential Cookies

Cookies required to enable basic website functionality.
Performance Cookies

Cookies used to understand how the website is being used.
Preference Cookies

Cookies that are used to enhance the functionality of the website.
Advertising Cookies

Cookies used to deliver advertising that is more relevant to your interests.

Aceept All Cookies

Save Preferences

Reject All Cookies

Save Preferences

Reject All Cookies

Accept All Cookies