RM29C07 Carbon MTB Wheelset

Comments on Recon WHEELSET RM29C07 All Mountain/Enduro

beadless carbon 29er wheelset 35mm wide tubeless compatible hand-built mtb 29er wheels

ron 2020/04/28

Is also aviable with hub: DT240S, Boost, 28H, 6-bolt, straigt pull, Sram XD What does it weight and coast? cheers ron

LightBicycle 2020/04/29

Hi Ron, Yes, the DT 240s boost hubs that you want are available. We do have straight pull, 6-bolt, DT SWISS 240s, 15/110mm boost, 12/148mm boost in stock. The 29er wheelset cost would be USD956.8/pair built with RM29C07 (35mm wide) and DT 240s BOOST hubs, Sapim CX-Ray spokes. The estimated weight would be 1485g+/-5. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Forrest 2019/05/15

I don't understand your site. You show wheelsets, but only talk about the rims. Do you sell wheelsets or not? If so, do they have boost or not on the 29er sets? Thank you

LightBicycle 2019/05/16

Hi Forrest, You have to click " global". Then you can see more hubs and spokes option. Because we offer quite a few hubs/spokes option for wheelset. So, it is hard to show on the first page. Sorry for the confusion. When you click " global" , you can see boost hubs for this 29er wheeelset. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Marc 2018/08/24

Hi, Is a rear hub 12x157 also available.. Thx

LightBicycle 2018/08/27

Hi Marc, Do you mean 12*157mm DH hubs or super boost hub? We have Industry Nine 12*157 super boost hub available. Will this ok with you? Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Justin 2018/06/01

If I order the 29c07 wheelset with dt swiss 350 12x142 hub for rear, can the hub be easily converted to QR/135?

LightBicycle 2018/06/01

Hi Justin, Yes, the DT 350 12*142 rear hub can be converted into 135mm*QR with the conversion kit. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Valdemar 2018/04/12

Good evening. I would like to buy a pair of wheels with the 29C07 rims with a 350 boost hubs. I would like to know how much the shipping costs to Portugal. Is there any additional tax to pay? Many thanks. Valdemar Coelho

LightBicycle 2018/04/13

Hi Valdemar, The shipping cost for one wheelset to Portugal is USD97.2 by EMS. The cost is not including the import customs tax. But we can lower the declared value of the wheelset so you can pay less tax Will this work for you? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

joe 2017/03/18

I would like to build the29C07 with DT 350 and 32 spokes, and I see they are only avalbile in 28 hole for this hub. Are they going to become available with the 32 spoke count soon?

LightBicycle 2017/03/20

Hi Joe, The 35mm wide 29er wheelset built with DT 350 boost hubs and DT competition race spokes is $733/pair. Or we have lighter spokes Sapim CX-ray, and the price is $84 added. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Bruce 2017/02/23

I would like to order CO2907 but want to be sure that both front & rear wheels are pass thru axles. Are dt350 hubs ok? I see you seem to like Hopes. Looks like my wheels will cost $750. What about shipping? Thanks, Bruce

LightBicycle 2017/02/24

Hello Bruce, Thanks for your inquiry. We can build the 35mm wide 29er wheelset with DT 350 hubs for you. For the hubs axle size, are there standard 15*100mm thru axle/ rear 12*142mm thru axle or boost 15*110mm thru axle/ rear 12*148mm thru axle? Below are the quotations for your reference. All pricing in USD. -WM29C07 (with DT 350 standard hubs): $713/pair -WM29C07 (with DT 350 boost hubs): $733/pair -Delivery cost: $78 for one wheelset to USA by EMS. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Nick 2017/02/04

Im interested in the 29Co7 with a boost 15x110 hope pro 4 hub 32 hole all mtn. UD matte with comp spokes, red nipple and red decal. can i get this but only a front wheel. I would also be happy to do a different hub if that changes anything? cost?

LightBicycle 2017/02/05

Hello Nick, Thanks for your inquiry. We can build the 35mm wide 29er front wheel for you. Please find our quotations as below. -WM29C07 front wheel (with Hope pro4 boost hub): $369/pcs -WM29C07 front wheel (with DT 350 boost hub): $344/pcs -WM29C07 front wheel (with DT 240S boost hub): $444/pcs Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Brett 2016/11/19

Hi, Can you get the German Tune King and Kong hubs and if so what would the cost be ? Cheers

LightBicycle 2016/11/21

Hello Brett, Thanks for your inquiry. Currently, only Hope pro4 and DT Swiss hubs are available, not German Tune King or Kong hubs. Sorry about that. Or you can order the rims only and build the wheels at your local shop, then you are able to get the wheels with the hubs you like, does that work for you? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Tomas 2016/09/15

Hi :) I have a Cannondale F-SI 3 Carbon: http://www.cannondale.com/USA/Bike/ProductDetail?Id=aa846bb7-45cb-4b9d-a616-581cabd8fcda And I want new and lighter Wheels. I use 35/30mm Wheels from Another Company on my other bike and I just love them. Can you build new Wheels with this rims 35/30mm to my Cannondale with the right Ai offset lacing? Best regards, Tomas

Light-Bicycle 2016/09/19

Hello Tomas, We are able to build the 35mm outer/ 30mm inner 29er wheels and make the rear wheel with 6mm offset. We have built some of this offset wheels for customers before. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Gerow 2016/09/09

I just need one of these rims. Is it possible to order a single, or do I have to order them in pairs?

Light-Bicycle 2016/09/10

Hello Gerow, Thanks for your support. It is okay to order just one rim. We have received your payment and will arrange manufacturing soon. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Soren 2016/09/04

Hi - I have a very light rigid 29r with v-brakes, which I race at a serious level. Question: Do you have any wide hooked or hookless 29r rims that can be customized to withstand brake pads on their side walls? I know this a very uncommon setup, but I would go far to upgrade this great rigid to wide rims. (Unfortunately, there is no way my fork can be upgraded to discs.). How about your 29C07? They seem to have a flat wall area...Thanks! Soren

Light-Bicycle 2016/09/05

Hello Soren, Thanks for your inquiry. For 29er rim, it is mtb rim and for disc brake only. The braking surface requires the rim’s straightness, and the RM29C07 is not straight enough to brake. So, only the road rim is able to be manufacture the braking surface. If you like the rim with brake tracks, then go with our U shape road rims. Our current rims are with special material and New high TG resin, it will provide better braking surface performance than basalt braking surface. Does that work for you? Rims profile of some U shape road rims for your reference. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Robin 2016/05/24

Hi - a few questions: - Does the DT Swiss 240s hub option use straight pull spokes? - Do you offer a 28H front wheel option? - Can the front wheel have radial lacing on the non-braking side? - Also does your price include shipping? (in my case to the UK) thanks!

Light-Bicycle 2016/05/25

Hello Robin, Thanks for your inquiry. -Currently, all of DT Swiss hubs we stock are J-bend version, so we will use J-bend spokes. -Yes, we can build the front wheel with DT 240S J-bend center lock hub (28H). Is that front 15mm TA? -The front wheel can be built in radial lacing on non-drive side. However, our builder doesn’t recommend the radial lacing as it puts extreme force on the flanges which may break off easily. 2 cross or 3 cross lacing patterns are what we recommend. -Our price doesn’t include shipping. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Ryan 2016/04/26

Would you guys be willing to build a set of wheels using these rims if i sent you the hubs i want to use? they hubs i will be using are dt swiss boost 240 hubs. 110mm front and 148mm rear.

Light-Bicycle 2016/04/27

Hi Ryan, The DT swiss 240s boost hubs are available here(J-bend and 32 hole). Do you prefer 6-bolt or center lock version? Do you need the rear hub for Shimano MTB 10/11s or SRAM XX1? Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

DH 2015/12/01

I don't see the price with DT Swiss 240s hubs. How much more is that compared to the Hope hubs?

Light-Bicycle 2015/12/02

Hello Dalton, Thanks for your inquiry. Please find our quotations as below. -Wheelset price (with 35mm wide rims, Hope hubs): USD833/pair -Wheelset price (with 35mm wide rims, DT 240S hubs): USD957/pair Currently, we also have wider 38mm wide 29er rim. It is much wider and stronger. Would you like to have a try? Please find attached rim profile. Rim weave in 3k matte & UD matte are more popular. Which do you prefer Thanks, Light-bicycle

Rich 2015/12/26

Hi I've just ordered the 35mm. I'd like to have the 38mm please. Can you adjust my order?

Light-Bicycle 2015/12/28

Hello Rich, It is okay to update the rims to be with 38mm wide. Don't worry.We can email you the balance link for you to pay. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

<< Return to Shop

1 2 3

Get in touch

Feel free to leave a comment if you have any questions or suggestions on our products or other issues.

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

We use cookies for a better experience. Learn more.

Customize

Your Cookie Preferences

We use cookies to improve your experience on this website. You may choose which types of cookies to allow and change your preferences at any time. Disabling cookies may impact your experience on this website. You can learn more by viewing our Cookie Policy.

Essential Cookies

Cookies required to enable basic website functionality.
Performance Cookies

Cookies used to understand how the website is being used.
Preference Cookies

Cookies that are used to enhance the functionality of the website.
Advertising Cookies

Cookies used to deliver advertising that is more relevant to your interests.

Aceept All Cookies

Save Preferences

Reject All Cookies

Save Preferences

Reject All Cookies

Accept All Cookies