Paul : Finished my recent build with some self-made decals on the Falcon56 in Black Reflex vinyl. Wheels came out awesome! Built up with Sapim CX Ray spokes and internal Nipples. Great Support from LB!

Darjusch : Finally, I finished the build of the wheelset. The wheels are awesome and performing great. Here is the bike with the black beautys for your gallery. Falcon R55 C rim with yuniper nitro road hubs, 2:1 rear lacing

Michael : Hello Grace! The time has come - the cyclocross season is in the starting blocks! And finally I can race my wheels, which I built in May With "Flyweight" carbon rim from Light Bicycle, Newmen hubs and SAPIM CX-Ray spokes, I've built a super lightweight wheelset of 1124g! It was really fun, the rims are very fine and precisely made, in the end I was almost sad when the wheels were finished, since building was so much fun! :-) But with the wheels on the Crosser, the fun really goes on: The Crosser can accelerate really cool with these wheels; It is noticeably better to accelerate out of the curves and even in the terrain it's really like flying over the trails.” Thanks an Best Regards

Rob : I ride light-bicycle-rims for about 4 years in 27,5“ and 29“. In this time there was no defect at any LB-rim. I think this is a very good result, because I ride park also as alpine hiking trails. Especially there are many stones and rocks that permanently bump against the rim.

Jusuf : Thanks for all your hard efforts, here is ARTAN's Bike and The 46mm Rims built, on Foto. Hope you would like to have it shared. cheers so much. Jo

Konstantin : LB Rims build with Sapim CX Ray & Novatec Carbon Hubs. Fit perfectly to the black/yellow Merlin frame & are used for training & triathlons.

Tim-David : These are my Light Bicycle All Mountain 38mm wide rims on my Cannondale Habit Carbon SE. So far I am very happy with these wheels. I have laced them up with Sapim D-Light Spokes, DT Prolock Squorx nipples and DT 350 + Lefty 60 hubs. Total weight is 1680g.

Steve : RM26C05 (DH) with Sapim washers and Schwalbe Procore: Schrader holes drilled to 8.2mm and ist getting pretty close at the Schrader valve stem ;P

Helmut : pink bronson with RM650BC13

Rawgnar : Nicolai Ion 16 24 hole rims on SunRingle straight-pull hubs with Sapim CX-Ray/Race 1476g excellent! holding up very nicely to the "abuse".