Customize Decals For Your Light Bicycle Carbon Wheels

Comments on customized decal making your rims be of personality

Robert 2021/02/11

can you make decals for front and rear wheels( PZ Racing 8.1 disk and 4 spoke front wheel)

LightBicycle 2021/02/11

Hi Robert, What is your graphic design and sketch? Then we can quote accordingly. Do you need graphic only or you need wheels also? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

frank 2019/05/13

what kind of material is your wheel decals made of?

LightBicycle 2019/05/14

Hi Frank, We offer three options of decals currently, We also provide the customized option. You can send us your design if you want to have your own decals. What product do you like to have the decals on? Let me know the details of your desired order and I will quote and create the invoice for you if you like. 1. The waterslide type of decals applied and baked on the rims under a clean coating. So you cannot apply this on your own. Mostly road decals are waterslide type. 2. We offer sticker type of graphics that you can apply on your own or we can apply them on before shipping. Available in both MTB, road and fatbike rims. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Rordog 2018/10/01

Hey, can I get the 35mm deep road rims in UD carbon with no decals applied? I want them PLAIN! Thanks

LightBicycle 2018/10/07

Hi Rordog, Yes, you can have the rims without decals. You can check the "No" option when you choose the decal. Or you can leave a message during the checkout just in case. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Millard 2015/09/18

Hello, I have a draft design but it uses the name of the bicycle company my bike is made by. I don't think you can legally use their name on the wheels but I do like their font. I think it would be ok to replace their name (VINER) with the word ITALIA and instead of a red V use the Italian flag. I can't seem to attach images to this post. Please send me an email so I can forward my design. Thanks, Millard Bolden

Light-Bicycle 2015/09/21

Hello Millard, For custom decal, you can email us the graphics you like, then we will design it on rim for your check. Do you prefer MTB or road rims? Then we will email the cross-section drawings & quote accordingly for you. Thanks, Vivian

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

JM 2015/09/07

Hi! I'm thinking of getting a 650b carbon wheels and customized decal. I want to ask how you can help me improve the decal design. I have drawn a draft on pen & paper, how do I send it? and is that how you can work on it or do you want it more done professionally or computer base design already. Can you give me a ballpark estimate of the project? I am building a bike with 1x11 drive train, so rear hub should be XD and If possible DT Swiss 240 hubs F/R. Also thinking gloss finish. But can you give me pros/cons between matte finish and glossThank you!

Light-Bicycle 2015/09/08

Hello JM, Thanks for your inquiry. For custom decals, you can take a picture of the draft and email to us. Then we will design it on rim for your reference. Normally, it is USD65 for one-color or two-color graphics. -For 650B wheels, we can build it with 27mm/ 30mm/ 35mm/ 38mm rims. Which do you prefer? Then we will quote accordingly. Do you ride XC, all mountain or downhill? -For hubs, DT Swiss 240S hubs are available. Do you prefer Shimano 11s (mtb or road) or Sram 11s? what hub axle size do you like for front & rear? Standard qr or thru axle? -For spokes & nipples, it is black Pillar Aero X-TRA 1420 spoke & Pillar PT 734 nipple (black/blue/gold/green/red/silver). For 3k/12k/UD, it is the outer carbon fiber layer to make the carbon fiber with different outlook, and all the inside carbon fiber are the same. So, the rim strength & weight is almost the same. For matte and glossy, it is only the painting different. Glossy looks shinny, a bit thicker painting than matte painting. But matte looks more popular. 3k matte &UD matte are more popular. Please find attached pictures. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Vincent 2015/07/08

Hello, I would like to order you a pair of 650B Downhill-MTB-wheelset-38mm for my santa cruz nomad 2015. Is it possible to have stickers with the same color of my bike ? mangeta or pink ? I can put the text I want ? And is it possible to have the wheel with the stickers on it because, I m not an expert of stikers..... Thanks a lot Vincent

Light-Bicycle 2015/07/08

Hello Vincent, Thanks for your inquiry. Nice to hear that your friends like our wheels. We are sure that you will like it also. Thanks for all of your support. According to your description, we’d like to recommend our new hookless 38mm wide 650B rims. It is much wider and stronger. Do you like it? Please find attached rim cross-section drawing. For rim weave, do you prefer 3k, 12k or UD? Matte or glossy? 32H? For hubs, we have Novatec & Hope hubs. Hope hubs are with better quality. Most of our customers choose Hope hubs. Because if hubs can work for a long time, then you do not have to pay extra cost & time to rebuild. Which do you prefer? What hub axle size do you prefer for front & rear? And we have black Pillar Aero X-TRA 1420 spokes & Pillar PT 734 nipples (black/ blue/ gold/ green/ red). Which color do you prefer? Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Max 2015/05/19

Hi light bikes! I was wondering if you could do an NBX-style sticker for a set of 27.5 carbon rims. go to www.NBXbikes.com for logo. if not, then please try www.Rideyourassoff.com Thanks!

Light-Bicycle 2015/05/20

Hello Max, Thanks for your inquiry. For custom decals, when we design other bike shop’s logo on our rim, it will be a big problem if the custom stops to check. It will be great if you send us your own graphics/logo, then we will design it on rim for your check. Normally, it is USD65 for one-color or two-color graphics. The decal we have here is not sticker. After sanding process, we apply the decal on rims, then do glossy or matte painting to cover the whole rim. So, it’s not removable. It is under the painting, different from sticker. Is that ok for you? Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Martin 2015/05/12

Hello, i am interest in 2 rims 700c 60mm. Is it possible to get the decal out of reflexion material ? Best regards Martin

Light-Bicycle 2015/05/13

Hello Martin, Thanks for your inquiry. RR60C02 (23mm wide 60mm clincher rim): 530 /-15g, USD175/pcs Please find attached rim cross-section drawing. For rim weave, do you prefer 3k, 12k or UD? Matte or glossy? Front 20H/ rear 24H? Please find below link. http://www.flickr.com/photos/light-bicycle/sets/72157631432948364/detail/ Currently, we also have new 25mm wide U-shaped 55mm clincher rim. It is much wider and stronger. Do you like it? The price is USD178/pcs. The decal we have here is not sticker. After sanding process, we apply the decal on rims, then do glossy or matte painting to cover the whole rim. It is not removable. If you like matte rims, the decal will be matte also. If you like glossy on rims, then the decal is glossy. The decal is under the panting. So, you like the rims in matte. Right? For custom graphics, normally it is USD65 for one-color or two-color. Or it is free to design light-bicycle decals om rims. Which do you prefer? Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

ali 2015/04/07

Hi i'm keen on a set of RM26C05 in UD matt. I would like custom decals. I have my own logos I would like on the rims, what are the dimensions for the decals ? what sort of file type do you need how much with shipping to NZ ?

Light-Bicycle 2015/04/08

Hello Ali, Thanks for your inquiry. RM26C05 (38mm wide 26er rim) hookless: 420 /-15g, USD173/pcs Please find attached rim cross-section drawing. It is ok to do UD matte. 32H? For custom decals, it is USD65 for one-color or tow-color graphics. You can email us the logo/graphics you like, then we will design it on rim for your check. Or attached is the “ai” template, you can find it as a “guide”. The shipping cost is USD68.1 for two rims to New Zealand by EMS. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Don 2015/03/25

Can I order the 27.5 in 38mm width without decals? And how much is the shipping and time to California? Thanks

Light-Bicycle 2015/03/26

Hello Don, Thanks for your inquiry. RM650BC13 (38mm wide 650B rim) hookless: 440 /-15g, USD180/pcs Please find attached rim cross-section drawing. It is ok to order the rims without decals. Do you prefer 3k, 12k or UD? Matte or glossy? 32H? The manufacture lead time is around 15 days for rims, and around 4-7 days to delivery. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Jerry 2015/03/20

I would like to order a set of rims only RM650BC13 with matte black /sour apple (Chris King hub color) decals ND /Matte Is this possible and would there be any extra cost Best Regards Jerry Cromwell

Light-Bicycle 2015/03/21

Hello Jerry, Thanks for your inquiry. RM650BC13 (38mm wide 650B rim) hookless: 440 /-15g, USD180/pcs Please find attached rim cross-section drawing. For rim weave, do you prefer UD matte, 3k matte or 12k matte? 32H? For custom decals, it is ok to design the decals in sour apple color. Normally, it is USD65 for one-color or two-color graphics. What is the text or graphic you like to put on the rims? Then we will design for your check. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Ingo 2015/01/30

Hello Can i use also Tube Tyre ??

Light-Bicycle 2015/02/04

hello Ingo, Sure, it is ok to use both tube tyre and tubeless tyre. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Rex 2015/01/24

On a pair of RM2906 rims I would like to have red decals of the style in the Decal Blog photos with the words LIGHT-BICYCLE and LYNSKEY on each side of the rims.Is this possible and if there is extra cost how much would that be? Thank you Rex White

Light-Bicycle 2015/01/27

Hello Rex, Thanks for your inquiry. RM29C06 (27mm wide 29er rim) hookless: 360 /-15g, USD165/pcs Please find attached rim cross-section drawing. For rim weave, do you prefer 3k, 12k or UD? Matte or glossy? 32H? For decals, it is ok to design front with “LIGHT-BICYCLE”/ rear with “LYNSKEY” in red. Please find attached graphics. Is that what you like? The price is USD60 for graphic 1-1, and it is free for graphic 2-2. Which do you prefer? The shipping cost is USD50 for two rims to USA by EMS. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

chris 2014/12/20

Hi Can you do these decals in the same blue as the pro 2 hubs. I am wanting them on a set of 29er 3k matt carbon Xc wheels that i am about to buy from you. Also instead of the Light bicycle message can i have ACC wrote on them? Regards Chris Regards

Light-Bicycle 2014/12/22

Hello Chris, Thanks for your inquiry. For custom decals, we can design the “ACC” in blue the same as blue Hope hub. It is USD60. Please find attached graphics. We have two versions. Which do you prefer? For 29er XC wheelset, we can build it as below. -Rims: Hookless 27mm wide 29er XC rims, 3k matte, 360 /-15g. 32H? Please find attached rim cross-section drawing. -Hubs: What Hope hub axle size do you like for front & rear? Standard qr or thru axle? Blue? -Spokes: Black, Pillar Aero X-TRA 1420 aero -Nipples: Pillar PT 734. Do you like black, blue, gold, green or red? Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Jason 2014/09/10

Hi, I'd like the Light Bicycle decal to be in the Yeti Turquoise color. The RBG values are 0,156, 163. Is this possible and would it be free? Thanks, Jason

Light-Bicycle 2014/09/11

Hello Jason, Thanks for your inquiry. May I know which rim you'd like? Then I can mail you the cross-section drawing of rim. For the rims, do you prefer UD, 3k or 12k? Matte or glossy? What spoke holes count do you prefer? http://www.flickr.com/photos/light-bicycle/sets/72157631432948364/detail/ The decal you want is as attached one but with Yeti Turquoise color, right? If yes, the decal cost is free. We will also make graphic file for your reference first. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

<< Return to Article

1 2 3

Get in touch

Feel free to leave a comment if you have any questions or suggestions on our products or other issues.

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

We use cookies for a better experience. Learn more.

Customize

Your Cookie Preferences

We use cookies to improve your experience on this website. You may choose which types of cookies to allow and change your preferences at any time. Disabling cookies may impact your experience on this website. You can learn more by viewing our Cookie Policy.

Essential Cookies

Cookies required to enable basic website functionality.
Performance Cookies

Cookies used to understand how the website is being used.
Preference Cookies

Cookies that are used to enhance the functionality of the website.
Advertising Cookies

Cookies used to deliver advertising that is more relevant to your interests.

Aceept All Cookies

Save Preferences

Reject All Cookies

Save Preferences

Reject All Cookies

Accept All Cookies