RM29C06 Carbon MTB Rim - Light Bicycle

Comments on Recon RIM RM29C06

bead hook-less rims carbon 29er light bike rim tubeless compatible

Schmitty 2020/12/29

Do these rims require spoke washers for assembly?

LightBicycle 2020/12/30

Hi Sir, Our rims are predrilled professionally and rim spoke wall thickness is strong enough. No need to use nipple washers in wheel buildings at the standard procedure. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Jakob 2019/09/19

Hello, in 2017 I purchased a set of disc mtb wheels, WM29C06. I have since sold the bike, but still have the wheels. I would like to convert them for a CX bike with rim brakes. Are the rims capable of working? I am thinking the brake surface is the only thing in question. I am only 75KG and they will be used as pit wheels. Thank you, Jakob

LightBicycle 2019/09/20

Hi Jakob, So good to know that your WR29C06 still works well since 2017. The rim brake surface special material and resin system supposes to put on the rim before molding. You can not use a disc rims on a rim brake now. There is not special brake surface on these mtb bike wheels. So my suggestion is, buy a new set of wheels that made with rim brake. It would also take a lot of effort to convert a rim brake bike to a disc brake bike as well. So buying a new set would be the best option. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Tom 2019/06/23

Hi, how much are the 27mm 29er recon rims in flyweight version? I need a pair with 32h drilling for gravel/CX/fat road tyres. Highest psi I run is around 55psi. How much for 2 rims posted to the UK? What spoke tensions are recommended for these flyweight rims? Thanks, Tom.

LightBicycle 2019/06/27

Hi Tom, The flyweight version of 29er XC rim RM29C06 (27mm wide) is USD158 (UD, matte, 32H) each. For the flyweight version, our recommendation usage would be for the front wheel of a CX bike (or gravel bike). I would also have to point out that the rider weight limit of this particular rim is 90kg. If you are heavier than 90kg or riding a bit aggressive, the rim won't be a good choice. Normally, we recommend using the flyweight version for the front wheel and the standard version for the rear wheel. Riding with 55psi is totally ok for rim RM29C06 as our recommendation tire pressure is under 60psi. Max spoke tension is 135KGF. Please do not exceed 135kgf while wheel building. We also email you the spoke tension chat we normal use for your reference. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Tchell 2019/04/15

I am looking at the flyweight version of the RM29C06. I am 81Kg (180 lbs). I am a 60yo I ride mostly single track mountain trails in Utah. I am a strong rider on smooth single track. I do not do any rough rocky terrain , no drops, air etc. Could I go with the flyweight or standard?

LightBicycle 2019/04/16

Hi Tchell, Since you are not doing aggressive riding and not a heavy rider yourself, we recommend using the flyweight version on the front and the standard version on the back. Are you looking for building a complete 29er XC wheelset from us? or carbon fiber bike rims only? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Henrik 2018/08/19

Hi Are you planning to launch the flyweight version with a wider internal mesurement like e.g. 25 mm?? And will it be possible to order a wheelset with 24 spokes in front and 28 in rear ?? Kind regards Henrik

LightBicycle 2018/08/20

Hi Henrik, Yes, we are planning on launching a new MTB series that with few flyweight version rims. The estimated launch time would be around September. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Luke 2018/07/07

Hi There, Are these available with no decal? Thanks!

LightBicycle 2018/07/10

Hi Luke, Yes, you can order plain rims only (without the decals). Do you want the standard version or the flyweight version? If you do not choose on decal color, the bike rims will be shipped without any graphic. Don't worry. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Chris 2018/07/04

Ciao, I recently crashed my CZero carbon rims on my Scalpel Carbon. I'm considering to buy a pair of 29C06 Flyweight rims (to be re-build on existing hubs) . My weight approx 76-78 kg. Level of riding: XCO training/racing in all type of conditions. Does the 29C06 meet the requirements?

LightBicycle 2018/07/05

Hi Chris, Few questions for you before you place the order. Let me learn more about your riding condition to make the proper recommendation. 1. What is the tire width you use? The recommended tire width for RM29C06 is 2.0~2.2". 2. Are you an aggressive rider? You are not a big guy, so as long as you don't ride aggressively, The flyweight is ok. 3. Do you ride rocky terrain often? Then we can check whether flyweight version 29er mtb bike rim is strong enough for you. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

aaron 2018/07/01

Hello What are the spoke tensions for the 29C06 flyweight rims with dt swiss 240s straightpull hubs and with the dt swiss competion race spokes. Thanks

LightBicycle 2018/07/04

Hi Aaron, We use the following spoke tension range while building symmetrical MTB wheels, pls take it as reference Front hub: non-drive side 115~125kgf, Drive side 85~95kgf Rear hub: non-drive side 85~95kgf, Drive side 115~125kgf It’s better to make sure that the max spoke tension under 135kgf. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Dmitriy 2018/04/28

Hello ! The specified weight limit that includes? My weight is 90 kg. Consider buying a lightweight rim. For my weight, they fit? Or should I choose the standard version?

LightBicycle 2018/04/28

Hi sir, RM29C06 flyweight version is for light XC riding. Could you kindly tell me what kind of riding you do? Are you an aggressive rider? I need more info to tell whether the flyweight version is right for you. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Roger 2018/02/12

Why is the RM2906 only rated at 40PSI? The hookless rims from several other manufacturers can run higher pressure and theirs is hookless. I only need 10more PSI. I would like to run these at 50 PSI with a 28mm tire for both some gravel roads and some tarmac. I only weigh 72.5kg. I would love to use your RM2906 because it is so light but the PSI is making me think about it. I see your gravel rim but would rather use this rim if I can.

LightBicycle 2018/02/13

Hi Roger, 40psi is the tire pressure we recommend to you that keep tire safely on the rim and make sure your rims at their best performance during riding. Normally, nobody would ride over 40psi during riding. 70psi is the tire pressure we used on lab when testing the rim mounted with an inflated tire. 70psi is the max tire pressure. We highly NOT recommend run with high pressure. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Fkent 2018/02/06

I am right on the edge of the weight limit for the flyweight. I know the tires are rated for "XC", but what testing methods are being used to determine weight limit. Would the flyweights hold up to "trail" riding at their max rated capacity?

LightBicycle 2018/02/07

Hi sir, What kind of riding style will you ride on RM29C06 rims? Do you ride aggressively? Normally, RM29C06 flyweight is for racing only. While normal training, it is better to use standard version for daily training. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

sam 2018/01/03

Hi, Can I order the 29er flyweight rim without decals?

LightBicycle 2018/01/04

Hello Sam, Thanks for your inquiry. It is okay to order the 29er flyweight rim without decals. If you like to place the order through our website, you can leave a massage that “you like rims without decals” when you place the order. Then we will see it and send you the plain rims. When you checkout, there is a message box for leaving message. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

billy 2018/01/02

hello i want order rm29c06 flyweight rim x2,i would like to ask a question,can i use chinese?thx

LightBicycle 2018/01/02

Hello Billy, Thanks for your continued support. Sure. Please let us know your question in Chinese, then we will reply you accordingly. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Kevin 2017/10/13

Can you make a hooked version of the RM29C06 Flyweight capable of higher psi? Would make an excellent light rim for fatter road tires.

LightBicycle 2017/10/14

Hi Kevin, Thanks for you inquiry! Currently, we do not have this rim in hook version. Do you ride road or road disc? May I know your tire width and your weight please? What about your usually tire pressure? Then we can check which is the suitable and lightest rim for you. We have RG922 hook(29mm outer/22mm inner). It should be okay for you. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Rob 2017/10/02

What is the recommended smallest tyre to use on these rims? Would they be suitable for cyclocross? I am also interested in the new gravel rims (RG922), are they available yet? Thanks.

LightBicycle 2017/10/08

Hi Rob, Sorry for the late reply. We were on National Day vacation from October 1st to 7th. We are just back to work today. How much tire pressure will you use? Then we can check whether RM29C06 rim is okay or not for your cyclocross riding. It is hookless design, it is better to make sure the tire pressure is less than 40 psi while riding, to preventing from tire blowing out while riding. Please check our RG922 gravel rim profile as attached. It is 29mm wide and 28mm deep, with hook design. It can hold tire pressure that is higher than 100psi. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

<< Return to Shop

PREVIOUS 1 2 3 4...8 NEXT

Get in touch

Feel free to leave a comment if you have any questions or suggestions on our products or other issues.

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

We use cookies for a better experience. Learn more.

Customize

Your Cookie Preferences

We use cookies to improve your experience on this website. You may choose which types of cookies to allow and change your preferences at any time. Disabling cookies may impact your experience on this website. You can learn more by viewing our Cookie Policy.

Essential Cookies

Cookies required to enable basic website functionality.
Performance Cookies

Cookies used to understand how the website is being used.
Preference Cookies

Cookies that are used to enhance the functionality of the website.
Advertising Cookies

Cookies used to deliver advertising that is more relevant to your interests.

Aceept All Cookies

Save Preferences

Reject All Cookies

Save Preferences

Reject All Cookies

Accept All Cookies