RECON PRO rim AM730 All Mountain

AM730 asymmetric rim profile carbon 650b carbon rims mtb

Buy & Configure

All wheels are 100% customizable at Light Bicycle. If your preferred specs are not listed, feel free to contact us (sales@lightbicycle.com) with your special requirements described.

RIM SPECS

  • Size 650B
  • Series RECON PRO
  • Use All Mountain
  • Type Hookless
  • Tubeless Ready
  • Inner/Outer Width 30mm/36mm
  • Depth 25mm
  • ERD 551mm (not including nipple head dimension)
  • Weight 425+/-15g
  • Offset 2mm (asymmetric)
  • Weight Limit 135kg
  • Spoke Hole Angle ±6°
  • Spoke Tension 145kgf
  • Tire Pressure 40psi max
  • Tire 2.2" ~ 2.7" recommended

Read more for TL tire pressure charts

TECH

Our new wide format All Mountain rim is a show stopper with its new scratch resistant BlackTek finish. Run all your favourite high volume tires and enjoy the benefits of our modern asymmetric profile.

The 30mm internal width has become one of the most popular widths in recent years, and for good reason! With the advancement of lightweight wide carbon rims, you get the traction and high volume benefits of a wide rim without all of the added weight. The AM730’s will give you a more reliable tubeless fit, increased stiffness, and significantly lower weight over a stock wheelset. Breath new life into your bike!

PC-MTB-Recon-PRO-paintless-rims-series-tech.jpg
MO-Recon-Pro-series-mountain-rims.jpg
Pad-MTB-Recon-Pro-rim-technologies.jpg

Learn More >>

WARRANTY

For Non-Pro Series Rims: From the date of purchase, 3-year Standard Warranty.

For Pro Series Rims: From the date of purchase, 5-year Pro Warranty as standard and an upgraded optional lifetime Premium Warranty with minimum charge.

Crash Replacement: It is applicable with the same period as the warranty time range that you purchased for the rims with 10% /25% discount for Non-Pro series /Pro series.

Learn More >>

5-years-warranty.png
lifetime-warranty.png

WHAT IS IN THE BOX

Package_carbon-rims-mtb.jpg
Package_light-bicycle-valve-decal-sticker.jpg
Package_light-bicycle-user-manual.jpg
Package_tubeless-valve-stems.jpg
Package_carbon-rim-tapes.jpg
Package_carbon-rims-mtb.jpg
Package_light-bicycle-valve-decal-sticker.jpg
Package_light-bicycle-user-manual.jpg
Package_tubeless-valve-stems.jpg
Package_carbon-rim-tapes.jpg

GALLERY

Adventure collection from all over the world.

LEARN MORE

COMMENTS

Z

Zack 2018/11/15

Hi, Is this new rim strong like rm650bc13 38mm?? Im 90kg and love to ride rocks,roots and steep terrain, and do not want to use cushcore. Is this suitable? Thanks in advance


LightBicycle 2018/11/16

Hi Zack, The 650B rim you are looking at is our newly launched paintless (scratch proof) rim AM730, which is a stronger rim than RM650BC13. Are you familar with our new technology? I sent file through email to you. Please check. Thanks, Lightbicycle


M

Mazalan 2020/06/23

New tech


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

C

Craig 2020/04/16

I am looking to setup a wheelset to share between a gravel bike and a mountain bike. I am concerned about whether the rims can handle the higher pressures. Your gravel tires list pressures up to 130psi for hook type. Do I have to worry about higher pressure damaging your All Mountain or XC tires?


LightBicycle 2020/04/17

Hi Craig, The AM730 (30mm internal/36mm outer width) 27.5er bike rim is with hookless design, which we recommend running tire pressure under 60psi. The tires might come off if you running with high pressure. Normally, you don't need to run high pressure for Mountain riding. Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

E

Erik 2019/12/21

Can you recommend spoke lengths for a 32h 3cross i9 torch hub for am730 rims? Thanks.


LightBicycle 2019/12/23

Hi Erik, We just sent the spoke length spec through email for I9 torch hubs with AM730 650B mountain bike rim. Please check your email. Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

M

Michael 2019/01/23

I'd like to add your RM650BC05 or AM730 asymmetric rims to a pair of industry nine 24-spoke trail wheels. I'm not sure if you are familiar with industry nine but they do not use traditional spoke nipples. They use a one piece aluminum spoke that drops in through the rim and threads directly into the hub flange. They claim they require a ERD of at least 556. Please advise.


LightBicycle 2019/01/23

Hi Michael, We got your message! Are you Industry Nine straight pull hubs? If yes, we are not familar with it, I9 straight pull hubs are only used for their own wheels. We only build wheels with I9 J-bend hubs here. You can check our ERD measure on below link. It is Rim Outer diameter-2*rim depth+2* spoke hole wall thickness. https://www.lightbicycle.com/support/technology Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

K

Kevin 2018/11/27

Hi Light Bicycle, Can you please send me the file for AM730 so I can look at how my hubs will lace up to these rims... thanks Kevin


LightBicycle 2018/11/27

Hi Kevin, We sent AM730 650B rim profile to your email address. If you need to caculate the spoke length, we can help you and let us know below information. 1. your lacing pattern 2. hub dimension as attached picture. 3. What spokes and nipples will you use? 4. internal nipple hole or external nipples? Thanks, Lightbicycle


REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Get in touch

Feel free to leave a comment if you have any questions or suggestions on our products or other issues.

Please leave your name here.

E-mail is required for further contact.

Please enter a message.