cart
cart
USD
  • USD
  • AUD
  • CAD
  • EUR
  • GBP
  • SEK
cart

Rim/Wheelset

Mountain Bike

Road/Gravel/CX Disc

Road Bike (Rim Brake)

E-Bike

Tri/TT/Track

Fat Bike

BMX/Folding Bike

Frameset >>

Equipment

Rim Compare >>

Rim Series

Recon Pro

Recon

Recon vs Recon Pro >>

Riding Type

XC/Trail

AM

EN/DH

Plus

E-MTB

Help Me Choose >>

Product Feedback >>

Falcon vs Falcon Pro >>

Rim Series

Falcon Pro NEW

Falcon

Product Feedback >>

Product Feedback >>

Rim Depth

20-40mm

41-60mm

61-90mm

Product Feedback >>

Rim Size

29er

27.5in

See All

Product Feedback >>

Drift vs Drift Pro series >>

Rim Series

Drift Pro

Drift

Product Feedback >>

Rim Size

26er

650b

Product Feedback >>

Product Feedback >>

light-bicycle-navigation-bar-full-custom.jpeg

Full Custom

Made to Order
light-bicycle-navigation-bar-quick-buy.jpeg

Quick Buy

In Stock
light-bicycle-navigation-bar-north-american-shop.jpeg

US Shop
light-bicycle-navigation-bar-european-warehouse.jpeg

EU Shop
NEWS.jpg
take-a-photo-of-your-bike.jpeg
road-riding-on-tarmac-roads.jpeg
rim-test-section.jpeg

Purchase Advice

After-Sales Service

help-center-2

Help Center
FAQs
Our-Story.jpg
Light-Bicycle-employees.jpg
carbon-fiber-rim-factory-tour.jpg
CONTACT-US.jpg

Build Your Recon Pro RIM XC925

All wheels are 100% customizable at Light Bicycle. If your preferred specs are not listed, feel free to contact us (sales@lightbicycle.com) with your special requirements described.


Buy wheelset

RIM SPECS

  • Model XC925
  • Material Toray T700 & T800 Premium Carbon Fiber
  • Size 29"/29er (ETRTO 622mm)
  • Series RECON PRO
  • Intended Use Cross Country
  • Bead Type Hookless
  • Tubeless Capable Yes
  • Inner/Outer Width 25mm/30mm
  • Depth 23mm
  • ERD 594mm (not including nipple head dimension)
  • Rim Weight Flyweight 295+/-15g, Standard 360+/-15g
  • Profile Asymmetric (2mm)
  • Max Cyclist Weight (on flat ground) Flyweight 90kg/ 198lbs, Standard 100kg/ 221lbs
  • Spoke Hole Angle ±7°
  • Spoke Tension 115~130kgf front disc side and rear drive side
  • Max Tire Pressure 35psi/ 2.75bar
  • Recommended Tire Width 2.1" ~ 2.4"

MTB carbon rim profile

TECH

Our new generation of Flyweight XC rims are updated with a wider profile and a front/rear specific layup. They are targeted towards cross country racers who seek every possible edge on the course.

Our goal with this iteration was to produce the lightest possible rim-set without sacrificing performance or reliability. The ultralight front rim utilizes a blend of Toray T700 and T800 carbon fiber and receives our spoke hole patching treatment, which maximizes weight reduction. The rear rim uses a continuous spoke bed and a stiffer reinforced layup design to create a balanced feel between the front and rear wheels.

Now with a wider profile, increased resistance to impacts, as well as a tailored front/rear design, the XC925' build the ultimate XC race wheelset.

PC-MTB-Recon-PRO-paintless-rims-series-tech.jpg
MO-Recon-Pro-series-mountain-rims.jpg
Pad-MTB-Recon-Pro-rim-technologies.jpg

Learn More >>

WARRANTY

For Non-Pro Series Rims: From the date of purchase, 3-year Standard Warranty.

For Pro Series Rims: From the date of purchase, 5-year Pro Warranty as standard and an upgraded optional lifetime Premium Warranty with minimum charge.

Crash Replacement: It is applicable with the same period as the warranty time range that you purchased for the rims with 10% /25% discount for Non-Pro series /Pro series.

Learn More >>

5-years-warranty.png
lifetime-warranty.png

WHAT IS IN THE BOX

carbon-rim-mtb-recon-pro.jpg
Package_light-bicycle-valve-decal-sticker.jpg
Package_light-bicycle-user-manual.jpg
Package_tubeless-valve-stems.jpg
Package_carbon-rim-tapes.jpg
carbon-rim-mtb-recon-pro.jpg
Package_light-bicycle-valve-decal-sticker.jpg
Package_light-bicycle-user-manual.jpg
Package_tubeless-valve-stems.jpg
Package_carbon-rim-tapes.jpg

Overview

Specs

Tech

Warranty

In The Box

Our new generation of Flyweight XC rims are updated with a wider profile and a front/rear specific layup. They are targeted towards cross country racers who seek every possible edge on the course.

Our goal with this iteration was to produce the lightest possible rim-set without sacrificing performance or reliability. The ultralight front rim utilizes a blend of Toray T700 and T800 carbon fiber and receives our spoke hole patching treatment, which maximizes weight reduction. The rear rim uses a continuous spoke bed and a stiffer reinforced layup design to create a balanced feel between the front and rear wheels.

Now with a wider profile, increased resistance to impacts, as well as a tailored front/rear design, the XC925' build the ultimate XC race wheelset.

Gallery

light-bicycle-xc925-mountain-carbon-wheelset-installed-on-a-specialized-s-works
Li : RIMS: XC925 Standard Paintless UD 28H External Hole HUB-F: DT SWISS 240 EXP 15/110mm BOOST Straight Pull Center Lock Black 28H HUB-R: DT SWISS 240 EXP 12/148mm BOOST SRAM XD Straight Pull Nipple: Sapim Aluminum Black Polyax Double Square Secure Lock External
China
1
light-bicycle-xc925-wheels-durable
Tomi : I've been riding rims for almost 5 years and now only the first adjustment. Training and many marathon races.. Best value for Money!
Finland
1
light-bicycle-xc-race-wheels-xc925-29er
Keven : XC925 Review Built with DT Swiss 240s hubs to make super light wheels for XC racing. The flyweight option on the front is still strong but even lighter. The stealth decals look awesome.
UK(Britain)
2
Scott-spark-rc-900-team-issue-axs-on-Light-Bicycle-XC925-wheels
Fabio : The Carbon WheelSet I bought at Light Bicycle for my Scott Spark RC 900 Team Issue AXS, is the best mountain bike wheelset I have ever had!!! They are beautiful and very light: riding with them is a fantastic feeling. The WheelSet is: Custom Recon Pro XC925 (25mm internal width) With Boost 240 EXP DT Swiss hubs and Sapim CX Ray spokes. Weight (verified): 1294gr.
Italy
3
light-bicycle-cross-counrty-XC925-wheels
Jorge : Your awesome wheels have taken me to some amazing places!
United States
1
Mondraker-29er-mountain-bike-on-Light-Bicycle-XC925-wheels
Anthony : It’s my third wheelset from LightBicycle and as always I am 100% satisfied with the rims they offer and I appreciate their amazing possibility to customize your order to fit your taste and budget. There really is no need to pay 3000$ for a carbon wheelset these days and I have gave my Lightbicycle rims to their fair share of riding and they haven’t let me down! I Will buy again!
Canada
1
YT-29er-mtb-bike-on-Light-Bicycle-XC925-wheels
Eli : Wheels look and sound great! Here’s a few pics…
United States
1
XC925-quick-buy-carbon-wheels
Light Bicycle : Rims: XC925 Flyweight F Standard R paintless UD Hubs: Bitex BX212 Black Centerlock 15/110mm 12/148mm Boost 28H 28T Spokes: Sapim CX Ray J-bend Nipples: Aluminum Black Quick Buy product - built by our experienced wheel builder upon order; ship in 3 days.
1

View More Reviews >>

COMMENTS

S

steve 2021/09/18

Hi LB, I want to use the RECON PRO rim XC925 Flyweight for my gravel bike. I use 40mm tires at about 35psi. I weigh about 72kg and ride 50/50 road and gravel. I don't do jumps since I'm an older guy and ride pretty mellow. Do you think flyweight is ok for me? Also, do you have a fly weight version for the rear rim, or can I build a rear wheel using the front fly weight rim? Thanks! Steve

LightBicycle 2021/09/18

Hi Steve, The flyweight rims would be ok for your riding both front and rear-wheel if you want. But I would like to make sure that this is the best-suited rim for you. The XC925 is an MTB XC 29er rim. Is there a reason why you choose it over other gravel road rims? We do have some 25mm internal width road disc rims available from 38mm to 50mm. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

D

Dan 2021/09/10

Looking for a light/strong xc carbon wheelset to suit 2020 cannondale fsi 3 with lefty fork Any suggestions Thanks Dan

LightBicycle 2021/09/11

Hi Dan, Do you like lefty 1.0 or lefty 2.0 for front 29er XC wheelset? And for rear wheel, is it 12*142mm or 12*148mm boost? Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

M

Mike 2021/07/02

Your RECON PRO rim XC925 is IDEAL for gravel wheels (asymmetrical, 25mm wide, hookless) but you only offer wheels using it configured for MTB hubs, not road hubs, i.e., for gravel I need 12x100 and 12x142 with XDR (12 speed) and usually 28 spokes - like with Novatec 411/412 (or DT350). Is it possible to configure that for order?

LightBicycle 2021/07/02

Hi Mike, For XC925 rims, they are hookless. It is better to ride the tire pressure lower than 40PSI, to prevent from tires blowing off. How much tire pressure will you ride on the gravel bike? Then we can check whether XC925 is working for you or not. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

R

R. 2021/01/12

Hello, it´s possible to order this rims tubeless ?? instead tubeless ready, without holes in bed of the rim.

LightBicycle 2021/01/13

Hi Sir, For XC925 29er bike rim, it is okay to manufacture them without spoke access holes on rim bed. But it will have not enough room for nippples going through inside because the rim is not deep enough. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

P

Pete 2019/08/08

Hello, I am building a rigid carbon 29er gravel bike. I will primarily be riding dirt and gravel forest roads, not single track, typically running 2.1 to 2.3 tires. I weigh 80kg, and am a very careful and smooth bike rider, with 30 years of avid mountain and road riding. I don't smash rims on objects, break bike parts, and very rarely crash. In other words, I am not hard on my bikes. Would the Flightweight XC925 be suitable as a front and rear rim in this case? Thanks for your help before I place my order. Pete

LightBicycle 2019/08/09

Hi Pete, We suggest using XC925 flyweight 29er XC rim on the front only to prevent an accident. Of course, you can use it for the rear wheel if you like. I can make the invoice for you considering we only have flyweight/standard mixed option online. Just note that the flyweight version is not as strong as the standard version. Could you provide the exact specs you like to have for the 29er cross country rims? Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

M

Madalin 2019/05/25

Hello, I'm interested in purchasing a pair of carbon rims for my hardtail bike. My weight is 90 kg, I ride XC mostly with a few rocky sections now and then. I use 29x2.25 tires and now I have a pair of aluminium rims but I'm looking for a wider width, 25 mm for example. Do you think the XC925 standard would be fitted for me or could you recommend me something else? I'm looking for a set of durable and lightweight rims if this is possible. I must tell you that I'm scared of the possibility that a pair of carbon rims to brake under my weight. That's why I'm a litlle bit suspicious to switch to carbon rims, though I always wanted this upgrade for my bike. Thanks!

LightBicycle 2019/05/29

Hi Madalin, First of all, XC925 29er XC rim is an excellent choice, It's the lightweight XC rim from our RECON PRO series that feature with stronger rim structure and manufacturing technique. The rider weight we recommend is 100kg tops. So your weight 90kg is ok to ride. However, you mention a rocky situation riding, we can customize a reinforced version out of the standard version for you if you don't mind adding some weight to the rim. If so, I will create the invoice for the customize version rim for you. Carbon fiber is with higher mutual and tensile strength material than aluminum, it's also a stiffer and better weight-to-stiffness ratio. With proper layup and structure design and manufacturing process, carbon rims are a definitely better choice over alloy rims. BTW, XC925 is with a 5-year standard warranty. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

B

Bart 2019/01/15

I weigh 145 lbs and ride 65% XC 25% Trail and 10% AM. I currently use your flyweight 29C06 on my hardtail and it works well for me. Would flyweight XC925 do as well? Thanks, Bart

LightBicycle 2019/01/15

Hi Bart, If you ride all mountain, it is better to use XC925 standard version. Do you ride aggressively? If our current RM29C06 flyweight is okay for you, then XC925 flyweight is also okay. XC925 recon pro rims are more durable. Thanks, Lightbicycle

B

Bart 2019/02/13

Is there a symmetric version of XC925 to use for the front? I like the weight and width of this rim but it looks all you have is the asymmetrical version which only makes sense for the rear.

LightBicycle 2019/02/14

Hi Bart, Sorry that we don't have the symmetrical version of XC925 29er XC rim. Currently, we will build asymmetrical rims for both front & rear. As you know, asymmetrical rims make both the front and rear wheel more balanced between the drive side and non-drive side. The MTB hubs are mostly with an offset from the centerline, so an asymmetrical rim would make the spoke tension closer. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

R

Ren 2018/12/14

I’m getting yeti 29er SB100 Xc /trail bike with 100mm rear ,front 120mm. 69kg with gears. I’m looking for light rims for XC trails .trail is not steep and just few small knee level drop.

LightBicycle 2018/12/15

Hi Ren, Our XC925 rim is specially designed for XC riding and would be strong enough for you. If you want light rim set for racing, you can order front flyweight and rear standard version. The flyweight version is only 295g+/-15, and rear standard version weights 360g+/-15. It's suitable for 2.1"~2.4" tire. Does it work for you? Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

J

Julius 2018/11/18

Gudday lightbicycle I'm xc rider my weight its almost 84kgs As of now i'm using aluminum rims Most of our rides are trail Front tire 2.25. 29" Rear tire 2.1 29" I'm planning buy your product carbon rims.any recommendation best for me? Thanks julius

LightBicycle 2018/11/26

Hi Julius, What feature are you after for the carbon rims? Lightweight? Strongness? Scratch proof? I have three 29er XC rim model to recommend, RM29C06 (lightweight), RM29C19 and XC925 (scratch proof). Note that only the XC925 is with the asymmetrical design, it provides better spoke tension balance between drive-side and non-drive side. It will make rims/wheels more durable, Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

R

Ralph 2018/11/20

Hi, I am a somewhat heavier rider (95kg). I am considering these rims for a custom set for my new fully (to be used during the cape epic). I would assume you would not recommend me to use the flyweight rim, but would a set of two standard rims work for me? Thanks, Ralph.

LightBicycle 2018/11/22

Hi Ralph, If you are not an aggressive rider but wanted a strong setup, the standard version would work well for you. What would be the tire width that you plan to use on the wheels? We can manufacture a stronger version for you since you are considering building a strong wheelset. What kind of riding you usually do? If you are riding both XC, AM, even EN, I would recommend you to check out the AM927 (33mm wide, 25mm deep). We can also make a stronger version of this rim for you of course. It would be priced higher because of the additional carbon fiber and extra work. Will this be ok with you? Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

J

Julius 2018/11/18

Gudday lightbicycle I'm xc rider my weight its almost 84kgs As of now i'm using aluminum rims Most of our rides are trail Front tire 2.25. 29" Rear tire 2.1 29" I'm planning buy your product carbon rims.any recommendation best for me? Thanks julius

LightBicycle 2018/11/19

Hi Julius, What feature are you after for the carbon rims? Lightweight? Strongness? Scratch proof? I have three model to recommend, RM29C06 (lightweight), RM29C19 and XC925 (scratch proof). Note that only the XC925 is with the asymmetrical design, it provides better spoke tension balance between drive-side and non-drive side. It will make rims/wheels more durable, You can check out all these three 29er rim details at the link below: RM29C06: https://www.lightbicycle.com/bead-hook-less-rims-carbon-29er-light-bike-rim-tubeless-compatible.html RM29C19: https://www.lightbicycle.com/U-shape-29er-rim-30mm-wide-hookless-MTB-bike-carbon-rims-tubeless-compatible.html XC925: https://www.lightbicycle.com/XC925-asymmetric-rim-profile-carbon-29-inch-carbon-rims-mtb.html Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

R

Rick 2018/11/11

Hi, how do these new flyweight versions compare to the older RM29C06 flyweight rims that are compatible for both front and rear use? Also would you be able to make these with only 1mm offset?

LightBicycle 2018/11/12

Hi Rick, All of our Recon Pro rims are paintless. Applied in model XC725, XC925 of Recon Pro Series, our lightest construction method uses an exclusive unidirectional prepreg with a very low fiber area weight. A variable thickness bed reinforces key areas around the spoke holes, eliminating excess material. A blend of Toray T-700 and T-800 offers weight saving benefits of T-800 carbon without compromising the strength or stiffness of the rim. May i know your weight and riding style? Then we can check whether it is okay to use flyweight version for both front & rear on these XC 29er rims. Offset is for enlarge the angle of drive side while building the wheelset, so that it can add the lateral stiffness. It should be keep at least 2mm offset. Why do you prefer 1mm offset? We can check with our enigineers. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

J

Jim 2018/10/26

Greetings. I am considering using your rims for a custom wheel set. I do mostly trail and XC riding on a full suspension 29er. Weight is approximately 78 kg. Trails are dry, and rocky and steep around here. Running 2.35 tires front and rear. I have always appreciated light bikes and wheels. Can you suggest a rim set for me? Thanks. Jim

LightBicycle 2018/10/31

Hi Jim, 1. The rims(XC925) you are looking at is our newly launched paintless series RECON PRO. As you can see, we offer two version of it, standard (360g+/-15) and the flyweight (295g+/-15). According to your description, the trail you ride on is normally steep and rocky, so I would recommend you to go with the standard version just to be safe. The flyweight version is made for those who ride light XC or lightweight rider. Since you are looking for a light set, XC925 would be a good fit. 2. Your 2.35" tires would be ok on XC925 29er rim. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

G

Gareth 2018/10/04

Hi. I weight 78kgs and am building up a hardtail. Given the info above are any of your “flyweight” rims suitable for a rear rim XC bike build? Or are you recommending the flyweight for the front and standard for the rear on all your rim options (including the 22mm internal diameter carbon XC rim) Thanks Gareth

LightBicycle 2018/10/07

Hi Gareth, Sorry for the late reply. We were on National Day vacation from Oct 1st~6th. We are just back to work today. Do you ride aggressively? If you like these light XC925 rims, we definetely recommend customer to order front flyweight version/rear standard version. It is more durable and it is a good combination. May i know your tire width please? Do you like rims only or complete wheelset? Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

F

felix 2018/09/24

hello. for XC925 rims, it is stated that the front and rear rim are made differently. How do we order 1x front rim, and 1x rear rim? i can't choose from the product page. thanks.

LightBicycle 2018/09/25

Hi, Felix Apology for the confusion. There's no so-called front and rear option. If you want two rims with the different configuration, all you need to do is choose the specs you want and add the rims to the cart separately. Or we can create the invoice for you if you think the process is too much trouble. The reason why we specific about the flyweight as front and standard version as the rear are that the flyweight version rim won't be strong enough as a rear wheel. We would like to list out our recommendations for you so you can get the best performance with your wheelset. Feel free to contact us by mail or instant message tool at the right bottom of every page. We are here for you. Thanks Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

See all 16 customer reviews>>

Get in touch

Feel free to leave a comment if you have any questions or suggestions on our products or other issues.

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

We use cookies for a better experience. Learn more.
Customize
Accept

Your Cookie Preferences

We use cookies to improve your experience on this website. You may choose which types of cookies to allow and change your preferences at any time. Disabling cookies may impact your experience on this website. You can learn more by viewing our Cookie Policy.

Aceept All Cookies
Save Preferences
Reject All Cookies
Save Preferences
Reject All Cookies
Accept All Cookies