carbon 60mm wheel road bikes 700c clincher

Comments on WHEELSET WR60C02 road bike wheel

Phil 2018/05/10

How can I get the 60mm carbon clincher wheelset at the 1430 +/- gram weight at the $560 cost? Any options from the list produce a weight of 1606 grams with a cost of $944. Please clarify how I can get the 1430 gram 60mm wheelset at $560. Is this old information, or is it up to date?

LightBicycle 2018/05/11

Hi Phil, Do you like road non disc wheelset or road disc wheelset? Then we can get the wheelset weight and price accordingly for your check. Thanks, Lightbicycle

Georg 2018/08/22

I'm interested to in the 60mm chlincher wheelset at 1430 +/- gram weight at $560 cost. I need road non disc wheelset. Can you send me the specs?

LightBicycle 2018/08/23

Hi Georg, Please check below road clincher wheelset specs and let us know if there is any questions. Cheapest setup is USD570/pair, weight 1593.54+/-25 --Rims: RR60C02, 23mm wide, 60mm deep, clincher, UD, matte, 20H/24H, with barke surface, decal to be confirmed --Hubs: black Novatec, front A291-SL100mm*QR/rear F482-SL 130mm*QR, Shimano Road 11s, J-bend, non-disc --Spokes: Pillar Aero X-TRA 1420, J-bend --Nipples: Black alloy (Sapim Polyax) Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Pete 2016/11/11

Hi, Do you have a key or legend that explains/defines the specs for wheel components that gives more information tohelp configure a wheel? For example, what's the difference between a 15/100mm axle and a QR/100mm axle? Or the difference between a 240S hub vs a A291SB-SL/F482SB-SL hub? Some of it I understand (like 24H vs 32H meaning 24 vs 32 spoke holes in the rim, but some of it I don't understand. Please help! :)

LightBicycle 2016/11/12

Hello Pete, Thanks for your inquiry. -For axle sizes, it depends on your fork and frame spacing. Please measure your fork and frame to check the correct size, or you can check these info with your bike shop. -For hubs, DT Swiss hubs are with better quality. Novatec’s bearings are not as smooth as branded hubs. If you’d on a budget, Novatec is a choice. The 240 hub shells have more machining and are quite a bit lighter. Besides weight, the 240 hubs use higher quality bearings which will roll faster and also last longer. -For spoke count, we can manufacture from 16H to 36H. It depends on customers' requirement. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Michele 2016/09/13

Hi, about the "carbon 60mm wheels" for clincher, can I order only the BACK WHEEL? Thanks, Michele

Light-Bicycle 2016/09/14

Hello Michele, Thanks for your inquiry. It is okay to order the 60mm rear wheel. Please find our quotations as below. All pricing in USD. -WR60C02 (with Novatec rear hub): $301/pcs -WR60C02 (with DT 350 non disc rear hub): $381/pcs -WR60C02 (with DT 240S non disc rear hub): $511/pcs Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Alex 2016/05/16

Hi I'm exactly 114 kg., so would I be ok to ride over potholes etc. on a 60mm clincher? Also, could I fit 25 mm tires?

Light-Bicycle 2016/05/17

Hello Alex, Thanks for your inquiry. According to your details, we’d like to recommend the 25mm wide U shape 55mm clincher wheels as below. It is much wider and stronger. Also, it can work well with 25mm tires. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Jaycee 2016/05/08

Hi, if I want just the rear fixed with a Brotures Shred decal, how much would that cost? 700c 60mm Plus how much shipping to canada?

Light-Bicycle 2016/05/09

Hello Jaycee, Thanks for your inquiry. The 60mm rear wheel with following specs is $298/pcs. -Rim: RR60C02, 24H, with brake tracks. 3k matte is more popular. Does that work for you? -Hub: Novatec F482 for Shimano 10/11s. -Spokes: Black, Pillar x-tra 1420 aero -Nipples: Alloy or brass? Silver or black? For custom decal, it is USD65. But we can not make the Brotures Shred decal on rims, it is not allowed. It will be considered as copy rims if the custom stops to check it. Can you change the graphic to other design? Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Michele 2016/05/01

Hi, if I want to order Front & Back wheels with 55mm for SHIMANO 11, which "Hub Brand" Novatec can I choose? Thanks.

Light-Bicycle 2016/05/03

Hello Michele, Sorry for the late reply. We were on the vacation for International Labour Day (1st -3rd May). All our road hubs are Shimano 10/11s compatible. Most of our customers choose Novatec. Please find our quotations as below. -WRU55C02 (with Novatec): $576/pair -Shipping with EMS: $78 All pricing in USD. If you would like to purchase, we can create the invoice accordingly for you. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Steve 2016/04/15

How can I order 1 front wheel at 60mm and 1 rear at 88mm?

Light-Bicycle 2016/04/18

Hi Steve, Thanks for your inquiry. It's OK to have front 60mm and rear 88mm wheels. You can email us your choice for hubs, spokes and nipples. We can quote accordingly for you. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

STefano 2015/07/31

Hi I would like to order 60mm clincher wheelset with disc brake hub. Do you have it? Also can you do hub with thru-axle? Thanks Stef

Light-Bicycle 2015/08/03

Hello Stef, Thanks for your inquiry. We can build the 60mm disc wheelset as following specs. -Rims: 23mm wide 60mm clincher rims, 500 /-15g. No need braking surface on rims? Please find attached rim profile. Rim weave in 3k matte & UD matte are more popular. Do you like it? Please find below link. http://www.flickr.com/photos/light-bicycle/sets/72157631432948364/detail/ -Hubs: Do you like 15mm thru axle/ rear 12*142mm for Shimano 10s disc? If so, we recommend Novatec D771/D72. Do you prefer black/red/white? -Spokes: Black, Pillar Aero X-TRA 1420 aero -Nipples: Pillar PT 734. Do you like black/blue/gold/green/red/silver? Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

George 2015/01/16

I've a Specialized Tarmac Pro SL Compact SRAM, Are the 60mm clincher Wheels compatible? Thank you for your answer, George

Light-Bicycle 2015/01/17

Hello George, Thanks for your inquiry. Our 23mm wide 60mm clincher wheelset can work with the normal road bike. We have two rims as below. Is that ok for you? Novatec A291/F482 for Shimano 8/9/10 (320g/pair, qr skewers come together with hubs) Bitex RAF10/ RAR9 for Shimano 8/9/10 (258g/pair, no qr skewers included) For rims, it is 23mm wide 60mm clincher rims, 530 /-15g. Please find attached rim cross-section drawing. For rim weave, do you prefer 3k, 12k or UD? Matte or glossy? Front 20H/ rear 24H? Please find below link. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Rick 2014/11/13

Good afternoon- Do you have any hubs that work with Shimano 11-speed? Also, looking for a 60mm depth in a 24mm width in a clilncher. Is that available? Matte, 20/24 is preferred, finish is flexible. Thanks!

Light-Bicycle 2014/11/14

Hello Rick, Thanks for your inquiry. For hubs, we have two hubs below to fit for Shimano 11s. Which do you prefer? Novatec A291/F482 (320g/pair, qr skewers come together with hubs, black/red/white) Bitex RAF10/ RAR9 (258g/pair, no qr skewers included, black) For rims, we only have 23mm wide 60mm depth clincher rims (530 /15g), no 24mm width. Is that ok for you? Please find attached rim cross-section drawing. It is ok to do 20H/24H. 3k matte & UD matte are more popular. Which do you like? For spokes, it is black Pillar Aero X-TRA 1420 aero. For nipples, it is Pillar PT 734. Do you like black, blue, gold, green or red? Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Jeppe 2014/08/01

Hi I was wondering which combination (hub and wave) would you recommend as being the best/ most reliable one/ the one which can take the most hits. I'm 75 kg, and planning to use it for rode/triathlon. hope you can help me - Jeppe

Light-Bicycle 2014/08/05

Hi Jeppe, Thanks for your inquiry. -For hubs, we have Novatec A291/F482 (320g/pair, qr skewers come together with hubs) for Shimano 8/9/10s. Bitex RAF10/ RAR9 (258g/pair, no qr skewers included) for Shimano 8/910. Which do you prefer? -For 3k/12k/UD, it is only the outer layer different and all the inside carbon fiber are the same. So, the rim strength & weight is almost the same. 3k matte &UD matte are more popular. Which do you prefer? Glossy or matte? Please find below link. http://www.flickr.com/photos/light-bicycle/sets/72157631432948364/detail/ Rims: 23mm wide 60mm clincher rims with basalt braking surface, 530 /-15g. Please find attached cross-section drawing. - For spokes, it is black Pillar Aero X-TRA 1420 aero. For nipples, it is Pillar PT 734. Which color do you like? Wheelset weight (with Novatec hubs): 1578 /-25g, USD570/pair Wheelset weight (with Bitex hubs): 1516 /-25g, USD570/pair Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Nicke 2014/07/31

Hi. Considering these as a road wheelset for my cyclocross. One question though, do you have any hub options that works with disc brakes? Also, is the 23mm wide rim the most durable option? Do you recommend 23 or 25 mm tires with them? Br, Nicklas

Light-Bicycle 2014/08/01

Hello Nicke, Thanks for your inquiry. -We can build the 60mm cyclocross wheelset for you. For hubs, we have Novatec front D711 standard qr/ rear D712-135mm standard qr for Shimano 8/9/10 disc. Do you like it? We have black, red and white, which color do you prefer? -Yes, currently we only have 23mm wide 60mm clincher rims. It is much wider and durable. Please find attached cross-section drawing. RR60C02 (23mm wide 60mm clincher rim with braking surface): 530 /-15g RR60C02 (23mm wide 60mm clincher rim without braking surface): 500 /-15g You like disc specific, so no need braking surface on rims, right? For rim weave, do you prefer 3k, 12k or UD? Matte or glossy? Front 24H/ rear 24H? Please find below link. http://www.flickr.com/photos/light-bicycle/sets/72157631432948364/detail/ -It is ok to use 23mm or 25mm wide tires with our rims. - For spokes, it is black Pillar Aero X-TRA 1420 aero. For nipples, it is Pillar PT 734. Which color do you like? Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Carsten 2014/07/07

Hi, Could you send me a quote for a set of carbon 23mm wide clincher 700c road bike wheels. 1 x front clincher 60mm 1 x rear clincher 88mm Novatec white A291/F482 hubs for Shimano8/9/10, black nipples, black spokes, both wheels 3k matte finish. Thanks, Carsten

Light-Bicycle 2014/07/08

Hello Carsten, Please find the attached cross-section drawing of the 23mm wide 60mm and 88mm clincher rim. So, your order(a pair road wheels) is as below, right? rims: 23mm wide, 3k matte, front 60mm with 20H, rear 88mm with 24H hubs: white Novatec A291/F482 for Shimano 8/9/10s spokes: black bladed Pillar Aero X-TRA 1420 nipples: black, alloy Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

James 2014/05/31

Hi, Could you send me a quote for a set of carbon 23mm wide 60mm clincher 700c road bike wheels? I need 28H front, 32H rear, black Novatec hubs, blue nipples, black spokes, 3k matte finish. I'm 110kg, do you think this will be OK? Plus shipping to Australia. Thanks, James.

Light-Bicycle 2014/06/03

Hello James, Thanks for your inquiry. Please find the attached cross-section drawing of the 23mm wide 60mm clincher rim. It's OK to have the rims with 3k matte and front 28H/rear 32H. http://www.flickr.com/photos/light-bicycle/sets/72157631432948364/detail/ There are black Novatec A171/F172 for Shimano8/9/10 speed(385g/pair). Is it OK? For the spokes, it’s black bladed Pillar Aero X-TRA 1420 (4.3g/pcs for 260mm) and blue pillar alloy light nipples. The max weight limit of this pair wheels is 125kg. So, it's OK for your weight. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Andy 2014/05/12

Hi! I'm interested to order carbon clincher wheel set. 60mm, 23mm width, front 24 /rear 28H, red novatec hub, red nipple, black aero spoke, 3k & matte finish, SRAM 10 speed compatible. Riding type: Time trial, Sprinter, Criterium Weight: 95kg Thanks

Light-Bicycle 2014/05/13

Hello Andy, hanks for your inquiry. Please find the attached cross-section drawing of the 23mm wide 60mm clincher rim. The max weight limit is 125kg for this rim. So, it's OK for your weight. We could manufacture the rims with 3k matte and front pag 24H/rear 28H. http://www.flickr.com/photos/light-bicycle/sets/72157631432948364/detail/ There is red Novatec A171/F172(385g/pair) for SRAM/Shimano 8/9/10 speed. Is it OK for you? Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

<< Return to Shop

1 2 3

Get in touch

Feel free to leave a comment if you have any questions or suggestions on our products or other issues.

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

We use cookies for a better experience. Learn more.

Customize

Your Cookie Preferences

We use cookies to improve your experience on this website. You may choose which types of cookies to allow and change your preferences at any time. Disabling cookies may impact your experience on this website. You can learn more by viewing our Cookie Policy.

Essential Cookies

Cookies required to enable basic website functionality.
Performance Cookies

Cookies used to understand how the website is being used.
Preference Cookies

Cookies that are used to enhance the functionality of the website.
Advertising Cookies

Cookies used to deliver advertising that is more relevant to your interests.

Aceept All Cookies

Save Preferences

Reject All Cookies

Save Preferences

Reject All Cookies

Accept All Cookies